Different Types of Windows in Buildings | Types of Windows | Metal Windows

There is always more to windows than to improve the usability and efficiency of your home. installing windows is the perfect way to increase your curb appeal. There are many types of windows that you use in the construction of your house. The main purpose of windows is to allow natural light into your rooms during the day and also let in air Types of Windows used in Buildings to keep the room fresh. 

Types of Windows Used in Buildings:

There are so many types of windows available based on their positions, materials, and functioning. Windows are classified as follows.

  1. Fixed Windows
  2. Sliding Windows
  3. Pivoted Windows
  4. Double-hung Windows
  5. Louvred Windows
  6. Casement Windows
  7. Metal Windows
  8. Corner Windows

Fixed Windows are fixed to the wall without any closing are opening operation. In General, they are provided to transmit the light into the room. The fully glazed shutter attached to the window frame. The shutters provided are generally weatherproof.



Sliding Windows: In this case window shutters are movable in the frame. The movement may be horizontal or vertical based on our requirements. The movement of shutters is done by the provision of roller bearings. Generally this type of window provided in busses, bank counters, shops, etc.


Pivoted Windows:

In this type of windows, pivots are provided to window frames. A pivot is a shaft that helps to oscillate the shutter. No rebates are required for the frame. The swinging may either horizontal or vertical based on the position of pivots.


Double-hung windows:


Double-hung windows consist of pair of shutters attached to one frame. The shutters are arranged one above the other. These two shutters can slide vertically within the frame. So, we can open the windows on top or at the bottom to our required level.

To operate the double-hung windows, a chain or cord consisting of metal weights is metal provided which is connected over pulleys. So, by pulling the weights of the cord the shutters can move vertically. Then we can fix the windows at our required position of ventilation or light etc.


For more information visit now: https://www.buildersmart.in/blogs/types-of-windows/

Comments

Post a Comment

Popular posts from this blog

Complete Guide for UPVC Doors and Windows

Image
Windows and entryways make your home stylishly gorgeous. The arrangement of uPVC entryways and windows makes your home significantly more proficient and secure. As these entryways and windows truly do confront downpour, winds and temperatures, you really want to supplant your entryways and windows with cutting edge ones. In this blog, we'll examine a definitive manual for uPVC entryways and windows. What is uPVC? uPVC is Unplasticized Polyvinyl Chloride which is an engineered plastic polymer. The 'uPVC' polymers are sought after and a well known decision with regards to assembling entryways and windows. uPVC is exceptionally tough, top notch and modest in assembling. uPVC likewise accompanies different styles and plans which impeccably suits your home. Entryways and windows made by uPVC are only ideally suited for a home and building. uPVC Entryways and Windows Contingent upon the characteristics of entryways and windows, the added substances that are to be blended in with
Read more

What is Plastering | Types of Plastering and Types of Finishing

Image
Types of Plastering:- There are various kinds of mortars are accessible, for example, Lime Plaster Concrete Plaster Mud Plaster Stucco Plaster Lime Plaster:- The point when lime is utilized as a limiting material is called lime mortar. Lime mortar is a kind of mortar made out of hydrated lime, sand and water. Lime mortar is like lime mortar, the primary contrast depends on the use as opposed to the arrangement. Mortar for lime mortar is typically ready by blending sand and lime to equivalent extents, to further develop the strength little amount of concrete is added to it. Concrete Plaster mortar:- At the point when concrete is utilized as a limiting material, it is called concrete mortar. It is particularly appropriate for moist circumstances. Concrete mortar is typically applied in one coat. The thickness of the coat can be 12 - 15mm or 20mm relying on location conditions and the kind of building. 6mm thickness of putting of 1:3 or 1:4 Proportion is suggested for concrete putting of
Read more